Raised Chain Assembly Bracket
Description
Raised chain assembly bracket
Used to support the top chain track over the conveyor beam, allowing an
open area between the top and bottom sections of the conveyor. This open
area can be easily accessed for cleaning purposes. The raised chain assembly
bracket is clamped to the conveyor beam, so that no drilling or welding
is required. It is also used to support other components, such as the
guide rail brackets.
Top slide rail
UHMW-PE is used over the stainless steel top slide rail support to provide
a low friction rail for the conveyor chain. Available in 10ft. long straight
sections; intermediate lengths can be cut as required.
Stainless steel top slide
rail support
Provides the continuous surface on which the top slide rail is mounted.
They are installed on the conveyor on the slots on top of the raised chain
assembly bracket. Available in 8 ft. long straight sections; intermediate
lengths can be cut as required.
Material specifications
Refer to the material specifications table on the
technical reference catalogue in the downloads
area.
Ordering information
1. Determine the amount of raised chain assembly
brackets required. Remember not to exceed 16” between them.
2. The mounting hardware is included with every raised chain assembly
bracket.
3. Determine the length of stainless steel top slide rail support and
top slide rail required for the conveyor. Two lengths of each one are
required for each beam length.
| Raised chain assembly bracket | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||
