Raised Chain
Assembly Bracket| Top Slide Rail
Raised Chain Assembly Bracket
Description
Raised chain assembly bracket
Used to support the top chain track over the conveyor beam, allowing
an open area between the top and bottom sections of the conveyor.
This open area can be easily accessed for cleaning purposes. The
raised chain assembly bracket is clamped to the conveyor beam, so
that no drilling or welding is required. It is also used to support
other components, such as the guide rail brackets.
Top slide rail
UHMW-PE is used over the stainless steel top slide rail support
to provide a low friction rail for the conveyor chain. Available
in 10ft. long straight sections; intermediate lengths can be cut
as required.
Stainless steel top
slide rail support
Provides the continuous surface on which the top slide rail is mounted.
They are installed on the conveyor on the slots on top of the raised
chain assembly bracket. Available in 8 ft. long straight sections;
intermediate lengths can be cut as required.
Material specifications
Refer to the material specifications table
on the technical reference catalogue in the downloads
area.
Ordering information
1. Determine the amount of raised chain assembly
brackets required. Remember not to exceed 16” between them.
2. The mounting hardware is included with every raised chain assembly
bracket.
3. Determine the length of stainless steel top slide rail support
and top slide rail required for the conveyor. Two lengths of each
one are required for each beam length.
| Raised chain assembly
bracket |
| XACE
62x98 |
Raised
chain assembly bracket |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| Note:
Mounting hardware included. |
|
| XACR
3048 |
Top
slide rail |
|
| |
 Length
10’-0” |
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
|
| XACL
2438 |
SS
top slide rail support |
|
| |
Length
82’-0” |
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
|
|
|
