Feet
Description
The articulated feet are available in different
styles. Their main purpose is to provide a solid ground base to the conveyor.
All of them, except for the casters, provide the vertical adjustment needed
to level the conveyor properly.
Ground base
Has a 304 stainless steel 5/8-11 threaded bolt, which is used to adjust
the height of the conveyor. The base swivels and is made of reinforced
polyamide.
Ground base options include:
• Ground base without lag holes.
• Ground base without lag holes with vibration pad.
• Ground base with lag holes.
• Ground base with lag holes and vibration pad.
• Pull out resistant ground base without lag holes.
• Pull out resistant ground base without lag holes with vibration
pad.
• Pull out resistant ground base with lag holes.
• Pull out resistant ground base with lag holes and vibration pad.
Use the vibration pad to reduce vibration transmitted
to and from the conveyor. Use the lag holes option to anchor the conveyor
to the floor. The pull out resistant option prevents the floor pad from
being released from the leveling screw.
All of them require a threaded tube insert.
Threaded tube insert
Used to connect the ground base with the beam support leg. The threaded
tube insert comes with
a 5/8-11 threaded brass insert and it is made of reinforced polyamide.
Bullet foot
Made of stainless steel, it does not require any insert for installation.
Used in sanitary installations.
Caster with brake
The caster can swivel and it has a brake lock that simultaneously locks
the wheel and the swivel. The wheel provided is phenolic and has a 4”
diameter. These casters are installed in the support leg using a rubber
expansion kit, which is provided with the caster.
Casters options include:
• Stainless steel 304: Corrosion resistant, excellent for washdown
applications.
• Zinc plated.
Material specifications
Refer to the material specifications table on the
technical reference catalogue in the downloads
area.
Ordering information
1. The threaded tube end and the feet are sold separately.
2. The casters and bullet feet do not use any additional insert for installation.
3. Two conveyor support feets are required per support leg.
| Feet | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
