Turntables
Use
• Feeder: feeds product at the start
of a line.
• In-line buffer: buffers the product prior to a machine.
• Accumulator: accumulates the product prior to a manual station.
• Reject: accumulates the rejected product on an inspection station.
Description
• A turntable consists of a rotary top where
the products accumulate.
• The rotary top is attached to a stationary base.
Operation
Feeder
• The operator manually loads the product into the turntable, without
any particular orientation.
• The feeder orients the product and feeds the line.
In-line buffer
• The product enters through the infeed guides and exits on the
outfeed end.
• Upon a backup, the empty space of the rotary top fills with product.
Accumulator
• Prior to a manual station, the product enters the top plate.
• The operator picks up the product to perform the manual operation.
Material specifications
Refer to the material specifications table on the
technical reference catalogue in the downloads
area.
Technical specifications
• Top diameter: 45-3/4” and 18”.
• Variable speed: 5-10 RPM.
• DC electric motor:
• 45-3/4” diameter top: 1/2 HP.
• 18” diameter top: 1/8 HP with electric
speed control.
• Input electrical power:
• 45-3/4” diameter top: 115VAC, 5
amp.
• 18” diameter top: 115VAC, 3 amp.
• Single guide rail with stainless steel sheath and UHMW-PE insert
to minimize friction.
• Stainless steel safety guards cover drive components.
• Continuous heli-arc welds, grounded and polished.
• Wash-down (with wash-down motor).
Component specifications are subject to changewithout prior notification.
Design recommendations
Feeder
• A product tray is recommended to help place the product into the
feeder.
• A powered orientator is required for non-round bottles.
In-line buffer
• A powered orientator is required for non-round bottles.
Accumulator
• An ergonomic station is recommended for all manual operations.
Consult system builder for ordering information.
Ordering information
1. Electrical hardware and electronic speed control
are included.
2. For custom parts, provide size and weight of package or product; unless
other information is indicated on drawings specification.
3. For custom unscrambling unit, provide size and weight of package or
product.
| Turntable | ||||||||||||||||||||||||||||||||||||
|
Turntable guides |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
| Turntable accessories | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
