End Plate Transfer | End
Roller Transfer | Side Transfer | Transfer
Shim | In-Line Transfer Shim | Center
Roller Module
Transfer Plates
Use
To transport the product from one conveyor to the next.
Description
End transfer
There are two types of end transfers:
- End plate transfer: the transfer surface consists
of a stainless steel sheet. Use the in-line option when conveyors
are in line to each other; or the 900 option when conveyors are
perpendicular to each other.
- End roller transfer: the transfer surface consists
of 5/8” diameter rollers. Use the in-line options when conveyors
are in line to each other; or the 900 option when conveyors are
perpendicular to each other.
Side transfer
The end of one conveyor is attached parallel to the infeed of the
second conveyor. The parallel length is usually 18” and the
transfer length is 12”.
Operation
The product glides through the transfer plate or is pushed
through it by back pressure, depending on distance, speed, size
and weight of the product.
Material specifications
Refer to the material specifications table
on the technical reference section in the downloads
area.
Design recommendations
Transfer distances should be kept to the minimum possible.
Accessories
• Transfer wheel: used in right
transfer. The idler wheel is mounted on an adjustable base, to ensure
proper package orientation through the transfer.
• Orientator wheel: used to rotate the product 90°.
Ordering information
1. For custom parts provide conveyor
model number, pulley diameter and distance between center of pulleys,
unless other information is indicated on drawings specifications.
2. To order a center roller module, desired length and type of roller
transfer must be provided for correct support base selection.
| End plate transfer |
| AETP
ILR |
Plate
in-line transfer, right |
|
| AETP
ILL |
Plate in-line
transfer, left
|
| AETP
ILC |
Custom
plate in-line transfer |
| |
|
| |
|
| |
|
| |
|
Note:
Shown in right position |
|
| AETP
L90R |
90°
transfer plate, right |
|
| AETP
L90L |
90° transfer
plate, left |
| AETP
L90C |
Custom
90° transfer plate |
| |
|
| |
|
| |
|
| |
|
Note:
Shown in right position |
|
|
End roller transfer |
| AETP
RILR |
Roller
in-line transfer, right |
|
| AETP
RILL |
Roller in-line
transfer, left
|
| AETP
RILC |
Custom
roller in-line transfer |
| |
|
| |
|
| |
|
| |
|
Note:
Shown in right position |
|
| AETP
R90R |
90°
transfer roller, right |
|
| AETP
R90L |
90° transfer
roller, left |
| AETP
R90C |
Custom
90° transfer roller |
| |
|
| |
|
| |
|
| |
|
Note:
Shown in right position |
|
|
Side transfer |
| AETP
DST |
Drive
side transfer |
|
| AETP
STC |
Custom side transfer |
| |
|
| |
|
| |
|
| |
|
| |
|
|
|
|
|
