|
One-Point Quick Adjustment Guide Rails
 Use
The one-point adjustment guide rails
are used when quick set-ups are required.
Description
• By rotating a single hand-wheel, the
operator can open or close a section of conveyor guide rails to
adjust them for different size products.
• A digital counter ensures the exact repeatability of the
setting.
• Minor adjustments due to material variances (such as bottle
diameter) can be performed easily and promptly.
Operation
External
A gear reducer controls the guide movement and an external rod connected
to a rack and pinion mechanism maintains the synchronization between
the rails.
Internal
A gear reducer controls the guide movement and a rod below the conveyor
body maintains the synchronization between the rails.
Material specifications
Refer to the material specifications
table on the technical reference section in the downloads
area.
Technical specifications
• Single side: 3” travel.
• Double side: 3” travel on each side maintaining center
line.
Component specifications are subject to change without prior notification.
Design recommendations
• A drive unit is recommended
at 20 ft. intervals.
• Rack and pinion mechanism should be installed at 24”
to 36” intervals.
• Consult system builder for correct component selection.
Ordering information
1. The 5/8” connecting rod
is sold in 10 ft. sections.
2. Mounting hardware included.
3. For custom parts provide conveyor model number or conveyor cross
section.
One-point quick adjustment guide rails - external
| AEAR
1PD ES |
Drive unit,
single side, external |
|
| AEAAR 1PD ESC |
Custom drive unit, single
side, external |
| |
|
| AEAR 1PP ES |
Slave unit, single side,
external |
| AEAR 1PP ESC |
Custom slave unit, single
side, external |
 |
|
One-point quick adjustment
guide rails - external
| AEAR
1PD ED |
Drive unit,
double side, external |
|
| AEAR 1PD EDC |
Custom drive unit, double
side, external |
| |
|
| AEAR 1PP ED |
Slave unit, double side,
external |
| AEAR 1PP EDC |
Custom slave unit, double
side, external |
 |
|
One-point quick adjustment
guide rails - internal
| AEAR
1PD IS |
Drive unit,
single side, internal |
|
| AEAR 1PD ISC |
Custom drive unit, single
side, internal |
| |
|
| AEAR 1PP IS |
Slave unit, single side,
internal |
| AEAR 1PP ISC |
Custom slave unit, single
side, internal |
 |
| AEAR
1PD ID |
Drive unit,
double side, internal |
|
| AEAR 1PD IDC |
Custom drive unit, double
side, internal |
| |
|
| AEAR 1PP ID |
Slave unit, double side,
internal |
| AEAR 1PP IDC |
Custom slave unit, double
side, internal |
 |
|
|
