Pneumatic Driver | Manual Diverter | Manual Stop | Pneumatic Stop

Diverter, Stops

Use
• Reject non-conforming product.
• Divert one lane to two lanes.
• Merge two lanes into one.
• Stop products flow.

Material specifications
Refer to the material specifications table on the technical reference section in the downloads area.

Technical specifications
• Maximum cycle rate: 30 cycles/minute.
• Rack and pinion in the double gate model.
• Pneumatic actuator in the single gate model.
• Pneumatic cylinder on the pneumatic stop.
• Pneumatic bladder on the bladder stop.
Component specifications are subject to change without prior notification.

Ordering information
1. The pneumatic system includes a 120 VAC solenoid valve.
2. For custom parts, provide conveyor model number or conveyor cross section, size and weight of package or product, and distance between center lines of conveyors.

Pneumatic diverter

AEDD PS Single arm diverter AEDD PSC Custom single arm diverter                           AEDD PD Double arm diverter AEDD PDC Custom double arm diverter

Manual diverter

AEDD ML Left arm manual diverter: YY=9”, Z=1” AEDD MLC YYZ Custom left arm manual diverter     AEDD MR Right arm manual diverter: YY=9”, Z=1” AEDD DRC YYZ Custom right arm manual diverter

Manual stop

AEDD MS Manual stop: XX=5”, ZZ=3” AEDD MSC XXZ Custom manual stop                         Custom part ordering information: • XX, ZZ dimensions required

Pneumatic stop

AEDD CS Cylinder stop: A=1-7/16” to 4-5/16” B=1-1/8” to 3-1/16”     AEDD CSC Custom cylinder stop                       AEDD BS Bladder stop AEDD BSC Custom bladder stop